Akasa Drivers Windows 7

I've been trying to install the Intel USB 3.0 eXtensible Host Controller Driver (version 3.0.0.16 as supplied by the Asus web site) but it balks when it gets to the PCI bus. At this point the entire system freezes for about 30 seconds and then a generic message is returned saying the install failed and some devices were not installed. If I try to install the PCI bus driver manually via the Device Manager (updating from the stock Microsoft driver and pointing it to the directory where the Intel USB3 drivers reside) It fails saying 'The parameter is incorrect'. Something has occurred in this process though, because the Device Manager is now listing the driver as Intel, version 3.0.0.16.

Thank you Vistual. I tried what you said and at first I thought it didn't work then I remembered that this is a new hard drive and it will not show up until I. Integral Akasa Driver Download. 10/5/2015 0 Comments. Downloaded Windows 7 drivers from Akasa site. Akasa Integral Driver Free Software Download.

Rebooting at this stage causes a BSOD while loading windows, requiring a repair boot and System Restore to recover. Searching the Intel web site for the same drivers (in case the Asus copy is corrupt) only returns drivers for Series 7 or Series 8 chipsets, with no specific mention of Series 9 (I have Z97). Why am I trying to do this? All my chipset-controlled USB3 ports (including the motherboard headers) are only operating as USB2. Zbrush 4 Keygen Invalid Request Code on this page. I have two ports fed by an ASMedia controller and they seem OK, it's just the Intel ones. This means I can't get my Akasa card reader to work, as it uses the motherboard headers.

I've tried reinstalling the chipset drivers (also downloaded from the Asus web site) to no avail. Any attempt to dislodge the Microsoft driver in favour of the Intel one results in boot failure.

The motherboard is an Asus Z97-PRO(Wi-Fi ac). I'm sorry I can't provide any more technical information at present (working nights and my PC is about seventy miles away) but if you tell me what you need I'll be back in about twelve hours. UPDATE I have half an answer: I went into the BIOS and changed Intel xHCI Mode to Enabled instead of Smart Auto, and all my USB devices appear to be operating correctly now. The driver still fails to fully install though, failing at the PCI bus again (although without the freeze this time)., for what it's worth. At least now I know my motherboard is not faulty, and everything works.

Partially installed drivers always worry me though, in case they cause problems further down the line.

Card reader name and model is usually written on the information label (usually located on the backside of the reader). Product ID can be found from from ID-card utility diagnostics (from ID-card software version 3.7). • Under Windows the card reader works with all drivers (manufacturer and Microsoft class drivers), unless marked otherwise in the table. • Under Linuxi and Mac OS X the default driver will work (USB CCID), unless marked otherwise in the table. • After using standby and hibernate functionality there could be problems with reading the ID-card.

This should only happen if the card was in the reader and some ID-software component in use during that time. Usually the solution is to remove and insert the card to the reader again but sometimes its required to restart the ID-software component or the computer. • PIN-pad readers can have issues in Windows terminal solutions as terminal systems are not officially supported environments by the ID-card software.

In the table below, the ID-software version besides the card reader means that this card reader has been tested with all the operating systems supported by that ID-software version. Comments box describes all specialities and possible problems. For every ID-software version the list of tested card readers is agreed on between Estonian Information Systems Authority RIA (client) and Sertifitseerimiskeskus (software developer). Reader picture Reader name and it's product ID according to ID-card utiliy diagnostics Comments Tested 17. Qss Printer Driver Download here. 6 Tested 17.8 Omnikey CardMan 1021 (USB) + + USB VID_076B&PID_1021&REV_0100 Bit4id miniLector Pocket USB CCID compatible. Does work with Windows, Mac OS X and Linux op. USB VID_25DD&PID_3111&REV_0100 Bit4id miniLector EVO USB CCID compatible.

Does work with Windows, Mac OS X and Linux op. USB VID_25DD&PID_3111&REV_0100 Bit4id IDone USB CCID compatible. Does work with Windows, Mac OS X and Linux op. USB VID_2021&PID_0001&REV_0300 Omnikey CardMan 4040 (PCMCIA) The external reader should be used with Linux distributions. PCMCIA OMNIKEY-CardMan_4040-FE82 Omnikey CardMan 4321 (ExpressCard54) Does work with manufacturer's drivers. + + USB VID_076B&PID_4321&REV_0203 Omnikey CardMan 3621 (USB PIN-pad) PIN-pad mode does not work under Windows XP with Internet Explorer and Chrome. USB VID_076B&PID_3621&REV_0600 Omnikey CardMan 3821 (USB PIN-pad and display) PIN-pad mode does'nt work under Windows XP with Internet Explorer and Chrome.

+ + USB VID_076B&PID_3821&REV_0600 Omnikey CardMan 3121 (USB) USB VID_076B&PID_3021&REV_0302 JSP-CR900 (Microlink's/Ordi All-in-one reader) Does work with manufacturer's drivers and under Windows OS. Might work with Microsoft Usbccid Smartcard Reader (WUDF) driver.

+ + USB VID_058F&PID_9520&REV_?0?0 USB VID_058F&PID_9520&REV_?033 SCM SCR 3310 (USB) + + USB Vid_04e6&Pid_5116&Rev_0518 SCM SCR 3340 (ExpressCard54) USB VID_04E6&PID_5119&REV_0523 SCM SPR 532 (USB PIN-pad) The reader works with the SCM Microsystems ver. 4.54.0.0 driver which comes automatically from Windows Update if the automatic driver update functionality is enabled. PIN-pad mode does not work under Windows XP. USB VID_04E6&PID_E003&REV_0510 SCM SCR333 internal card reader for desktop computers USB VID_04E6&PID_5113&REV_0413 HP SmartCard keyboard (model KUS0133), ver. ED707AA#ABB • This version of the keyboard might not work as a card reader in Linux and Mac OS X environment because of missing drivers.

• Under Windows XP works normally as a card reader with a driver from manafacturer's website (sp45492.exe 16.january 2010 version). Without the manufacturers driver the reader can sometimes behave as a PIN-pad reader (PIN-dialogue window is not displayed). • Under Windows Vista / 7 / 8 works as a card reader with both default and manufacturer's driver.

• If Microsoft WUDF driver is used and the card is inserted after the keyboard is connected to the computer then the card cant be read. This means that the card reader notification light doesnt not light up and ID-card utility will continue to display an error: 'No card found'. If the keyboard is connected to the computer while the card is already in the reader then the card can be read. If user has enabled the automatic driver update through Windows Update then a working HP driver version 4.35.0.2 will be installed. + + USB VID_03F0&PID_1624&REV_0535&MI_01 USB VID_03F0&PID_0036&REV_0124&MI_01 HP SmartCard keyboard (model KUS0133), ver. BV813AA • This version of the keyboard might not work as a card reader in Linux and Mac OS X environment because of missing drivers. • Under Windows XP works normally as a card reader with a driver from manafacturer's website (sp45492.exe 16.january 2010 version). Without the manufacturers driver the reader can sometimes behave as a PIN-pad reader (PIN-dialogue window is not displayed).

• Under Windows Vista / 7 / 8 works as a card reader with both default and manufacturer's driver. • If Microsoft WUDF driver is used and the card is inserted after the keyboard is connected to the computer then the card cant be read. This means that the card reader notification light doesnt not light up and ID-card utility will continue to display an error: 'No card found'. If the keyboard is connected to the computer while the card is already in the reader then the card can be read. If user has enabled the automatic driver update through Windows Update then a working HP driver version 4.35.0.2 will be installed.

USB VID_03F0&PID_1624&REV_0535&MI_01 USB VID_03F0&PID_0036&REV_0124&MI_01 Akasa AKICR06L All-in-one-reader for desktop computer Unstable under Linux distributions. + + USB VID_058F&PID_9520&REV_?0?0 Akasa AKICR09 All-in-one-reader for desktop computer USB VID_058F&PID_9520&REV_?0?0 Akasa AK-CR-03 (USB) USB VID_058F&PID_9520&REV_?0?0 Ricoh RL5c476 II (internal reader for HP laptops) There could be issues under 64bit versions of Windows. The external reader should be used with Linux distributions. PCMCIA RICOH-Bay8Controller-F1B2 Akasa Ricoh RL5c476 II (internal reader for Lenovo aptops) Linux distributions not supported.

USB VID_17EF&PID_1003&REV_0100 O2micro (internal reader for Dell laptops) The external reader should be used with Linux distributions. USB VID_0B97&PID_7772&REV_0110 Broadcom (internal reader for Dell laptops) There are issues with older ID-cards (issued before 2011) and Digi-ID cards.

The external reader should be used with Windows XP The external reader should be used with Linux distributions. + + USB VID_0A5C&PID_5800&REV_0101&MI_01 +ID SMART CARD READER +iD smart card reader is CCID compliant for easy plug & play (no additional USB driver is required of operating systems supports CCID). For non CCID OS support please download drivers here. Enable drivers automatic update and please make sure your ID card and OS software is up to date. USB VID_0BDA&PID_0165&REV_6123 Gemalto PC-USB-TR IDBRidge CT30 (USB) + + USB VID_08E6&PID_3437&REV_0200 Gemalto IDBRIDGE CT710 ESTONIA (or Gemalto Ezio Shield) (USB PIN-pad and display) Card reader that can only works in PIN-pad mode. Manufacturers drivers are available for Windows 10, 7, 8.

Drivers can be downloaded from. Does not work under Linux since there are no manufacturer drivers.

Does not work with Mac OS X op. Systems and neither does not work with Firefox under Windows or Linux op. + + USB VID_08E6&PID_34C2&REV_0102 ACS ACR38U-N1 (USB) USB VID_072F&PID_90CC&REV_010 ACS ACR38u-J1 (USB) USB VID_072F&PID_90CC&REV_0100 Cherry RS 6700 Smart Board XX44 With default driver the reader will work as a PIN-pad reader under Windows 7 (both 32 and 64 bit) Will work as a normal reader with Microsoft Usbccid Smartcard Reader (WUDF) driver. USB VID_046A&PID_0010&REV_0106&MI_01 Cherry RS 6600 Smart Board XX44 With default driver the reader will work as a PIN-pad reader under Windows 7 (both 32 and 64 bit) Will work as a normal reader with Microsoft Usbccid Smartcard Reader (WUDF) driver. USB VID_046A&PID_0010&REV_0106&MI_01 Ingenico LEO (formerly XIRING) (USB PIN-pad and display) PIN-pad mode does not work under Windows XP with Internet Explorer and Chrome.

USB VID_0F14&PID_0038&REV_0112 Lenovo USB Smartcard Keyboard Microsoft Usbccid Smartcard Reader (WUDF) driver should be used. + + USB VID_17EF&PID_6007&REV_0116&MI_01 Dell RT7D60 USB Smartcard Keyboard Does not work as a card reader under Mac OS X and Linux. Under Windows works with default Microsofti WUDF draiver. USB VID_413C&PID_2101&REV_0100&MI_01 Fujitsu keyboard KB SCR Under Windows 7 and 8 authentication and digital signing works in PIN-pad mode. In normal card reader mode its necessary to use Microsoft WUDF driver.

Microsoft Usbccid Smartcard Reader (WUDF) (USB VID_0BF8&PID_1017&REV_0121&MI_01) SmartCase KB Smart Card Reader (USB VID_0BF8&PID_1017&REV_0121&MI_01) To get a good overview of different card readers, look. If you have different knowhow about smartcard readers listed in this article, please do not hesitate to let us know about that by sending an e-mail to.